Arty A7-35T Vivado MicroBlaze Tutorial
Here’s a complete step-by-step guide to create and run a MicroBlaze soft processor on the Digilent Arty A7-35T (Artix-7 XC7A35T) using AMD/Xilinx Vivado 2025...
Posts by Category
Blog
Arty A7-35T Vivado Blinky Tutorial
Here’s a complete step-by-step guide to create a simple blinky LED project (the FPGA “Hello World”) for the Digilent Arty A7-35T (Artix-7 XC7A35T) using AMD/...
Catchcam: My Project is Now Open Source
I’m thrilled to announce that I’ve open-sourced the software for the Catchcam Speed Camera Detector. You can now find it on GitHub at github.com/IvanVnucec/c...
Catchcam: Enclosure Design and 3D Printing
After an extensive search for a suitable off-the-shelf enclosure, I decided to design and 3D print a custom enclosure for my Catchcam project. My requirement...
Catchcam: Designing GNSS Circuitry
In this post, I will discuss the design and implementation of the GNSS circuitry for my Catchcam project.
Catchcam: Designing Audio Circuitry
In this post, I will be discussing the audio circuitry of the Catchcam. The audio circuitry is responsible for converting the digital audio data from the mic...
Catchcam: Choosing Components
Lets choose major hardware components for the Catchcam project. As I’ve written before, the idea is to have a plug and play device that alerts if the vehicle...
Catchcam: Project Idea
I’m starting a new project called Catchcam - a plug and play speed camera detector that works completely offline. It’s similar to Waze or Radarbot, but with ...